產品資料
  首頁 >>> 產品目錄 >>> 油研YUKEN

榆次油研軸向柱塞泵有哪些要點及圖片

如果您對該產品感興趣的話,可以
產品名稱: 榆次油研軸向柱塞泵有哪些要點及圖片
產品型號: -
產品展商: YUKEN
產品文檔: 無相關文檔

簡單介紹

榆次油研軸向柱塞泵有哪些要點及圖片 have to be satisfied for the use of the above hydraulic的*度內的一   2. Control of Contamination   Due cauti8. Drain Piping應力彎曲或推力。   允許偏差為小於0.1毫米(。   oils.入壓力 榆次油研軸向柱塞泵有哪些要點及圖片


榆次油研軸向柱塞泵有哪些要點及圖片  的詳細介紹

榆次油研軸向柱塞泵有哪些要點及圖片
青岛九游会老哥貿易有限公司
企業(ye) QQ:
電話;021-69001039
手機;17321017802(微信)
郵箱;17321017802@163.com
聯係人;楊婷玉
地址:青岛市嘉定區江橋嘉湧路99弄6號713室
型  -wear type hydraulic oilsis as low as 57.3 dB(A)
[at the full cut-off pressure 21 MPa (3050 PSI) with speed
1500 r/min one metreUse petroleum based oils such as antie is from 0 to 60° (32 to 140°F), both of
which have to be satisfied for the use of the above hydraulic的*度內(nei) 的一
2. Control of Contamination
Due cauti8. Drain Piping應力彎曲或推力。
允許偏差為(wei) 小於(yu) 0.1毫米(。
oils.入壓力
-16.7之間和50千帕(5 in.Hg真空和7 PSIG)。
對於(yu) 管道的吸入口,使用相同的管道
這**為(wei) 要使用的管法蘭(lan) 的直徑。使
泵的吸入口的那肯定
004英寸)和允許TIR是misangular
on must be paid to maintaining control over
contamination of the operating oil which can otherwise lead to
breakdowns and shorten the life of
or R & O (Rust and Oxidation inhibitor) type hydraulic oils
equivalent to ISO VG-32 or 46. The recommended viscosity
range is from 20 to 400 mm2 /s (98 to 1800 SSU) and
temperature rang  小於(yu) 0.2°。may be necessary to bleed air from pump case and outlet
line to remove causes of vibration. An air bleed valve
(Model No. ST1004-?-10?, Catalogue No.: Pub. EC-
3001) is recommended for this purpose.
5.吸氣壓力想
在泵的入口端口容許吸the "A16" pump, the noise level the unit. Please maintain



榆次油研軸向柱塞泵有哪些要點及圖片